Quote:
Originally Posted by ischmitz
There are individual wires to each bank of injectors. But inside the DME there is only one output that drives both wires and thus all injectors fire at the same time. You could have a harness issue (affecting one bank) or a single injector. All injectors are wired in parallel.
As others said the easiest would be a set of NOID lights or an LED test light to confirm all injectors are driven.
Ingo
|
I put the light on the plug for 4 (which I know should be good) & 5, both were making the light bulb glow a little. I then swapped the connection for 4 & 5, and still, the header for 5 is cold.