|
I used the Eastwood Internal Frame coating on mine...about 6 cans. It is a paint, looks a lot like the green stuff that is on the inside of aircraft
It comes with a neat little hose/spray tip arrangement that lets you stick it into the cavity and then spray to your hearts content. From what I can tell it creeps well and is very liquid so ought to soak into the various crevices.
Allegedly it contains zinc phosphate and a bunch of resins that **should** work. I used it mainly in areas where I had done welding and this was the way to protect the backside/inside of the cavities.
I will also follow up with Waxoyl or similar when my paint work is done.
Tell you in 10 years whether it works or not...
Dennis
|