|
Darn, you guys are good, mystery solved with all your help. Turns out that when I installed the new engine compartment light I reversed the ground and +12V wires. When I had the light hanging in the air it worked fine, but screwed it to the lid the ground side (to which I had my +12V) is meant to make contact with the lid mounts which are ground. Reversed the wires and everything is working fine now. When I installed the light housing a while back I knew it didn't work, but didn't get around to debugging it until now. I also didn't notice that the left side tail lights were out until recently, so didn't make the connection.
NEVER would have thought to look at that light if it weren't for your suggestions, so thanks very much!
Bill
|