1988 3.2 Carrera drivetrain wiring issues
I bought my 1988 Carrera with the entire drivetrain missing. I bought another drivetrain from a 1988 (3.2 with G50) and installed it, but I’m having a hard time figuring out where all the wires go since I did not remove the drivetrain myself. I think some of the wire harness might be missing.
Problem 1: The oil pressure sending unit and the temp sensor (on the oil fed tensioner lines) have no wires nearby to hook up to them. Where do wires for these tie into the engine compartment wiring harness?
Problem 2: Where does the wire to the reverse light switch on the G50 transmission come from? I thought it was in the same harness as the starter wires.
Problem 3: There is a six wire connector at the rear fuse/relay block. There is no relay for it to plug into that I can see...am I missing a relay?
Problem 4: Near the above is a female 3 wire round connector...no male for it that I can find.
Problem 5: On the opposite side by the oil filter is a very similar 3 wire female with no male counterpart.
Thanks for you help...ready to get this thing back on the road!