Quote:
Originally Posted by Flat6pac
The temp and pressure wire come across the top of the fan in the specific harness from the main 14 plug in harness on the left. Breaks off the harness near the distributor over the fan.
|
Found it! Thanks for the tip.
Quote:
Originally Posted by Flat6pac
I don’t recognize the round connectors they look like oxygen sensor connectors but are too far to the rear on the left and don’t belong near the oil filter and tank.
Good luck,
Bruce
|
This makes sense for 02 sensor connectors...my engine was last in a race car which ran open headers. The one by the oil filter is long enough to go to the back corner like the other side. Did '88 Carreras have two 02 sensors stock? I thought it was just one.
Thanks for the help Bruce! Just need to solve the relay mystery now.