Quote:
Originally Posted by Trackrash
I would think you could support the rear on jack stands supporting the torsion tube and the front on jack stands supporting the front cross beam. You would want to make sure the floor is level and flat. With a coupe I can't imagine you would have any problem unless you started messing with the roof structure. And since you have a cage, I wouldn't worry.
If you are concerned, why not take the basic chassis measurements, as it sits, to make sure you are starting with a straight tub?
|
Agree, a lot can be done with a good tram guage and a spirit level. That's what I did when I was working on my suspension pan, but I would do the same thing when working on the sides.
Link to video for details:
https://youtu.be/RHk3--W7V0w
start around 7:15 for the level and measure technique.