[55rag]

Thanks everybody for the responses. I worked on the car a bit today and found that I have both no spark and no fuel pump. I get no spark when I plugged in a spare plug and no combustion from spraying starting fluid in the intake. I also test the coil which tested good. I jumped with jumper cables to no affect. The CHT sensor tested within range but I got bad readings on both reference and speed sensors. I am not sure I trust the readings I got because they were totally open between all but pins 1 and 2 on the middle sensor. I'm not sure which is which. So, I find it hard to believe that both sensors went bad from sitting. Is there anyway I can further isolate or is there a way to jumper these sensors so I can start the car? Would these sensors cause both no fuel pump and no spark issue?

Thanks so much,
Jason