[Harpo]

My shroud p/n is 930.106.102.4R. I cant find the p/n on the fan but I purchased them as an assembly, installed on the alt. I disassembled and sent the fan & shroud to tru 6 to be refinished.

So I have two issues here;

1) why wont the components that came apart go back together?
2) can I forward date my fan from a 3.0L to a 3.2L fan? I thought the larger alt 90 vs 75 would be beneficial.

According to JohnnyH the following wires need to be replaced (upgraded)
1. Red wire from alternator to starter solenoid.
2. Brown alternator ground wire to engine case.


Thanks


David