View Single Post
RSR Motors RSR Motors is offline
Registered User
 
Join Date: Jan 2019
Location: Somewhere on this earth
Posts: 5
Quote:
Originally Posted by flightlead404 View Post
Second this request for information.

If you can't give AFR directly, but have a gastester type exhaust sniffer, giving us the %CO at idle with a warm engine at the tailpipe if no cat, or at the lambda sensor bung in front of the cat if there is one, would be a help.
The engine starts immediately when the engine is cold.
Stationeir is at 950 rmp both cold and warm and continues to run nicely.
If you give gas cold or warm and when discharging the gas it falls silent.
When you drive the vehicle, he pulls the stones out of the ground.
The prints are in order both gold and warm because we have already checked them.
CO has not yet been tested because I do not see the point at present.
On the throttle is a potentio meter and this could not be correct and I am looking for everything to find these adjustment data but nothing found in the documents.
System pressure 7.1 bar
When the engine is warm, press 4.52 bar
The car has always ridden well until he has stood still for 9 months and then the problems started, what is the car was much washed off to remove the dust.
Old 01-07-2019, 12:33 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)