[mike sampsel]

My passenger side nozzle never worked. My check valve flowed fine, so I replaced the driver side check valve and all was good. Except the pressure had to build up. Replacing the check valve on the passenger side worked. Recommend you get two new nozzles and two new check valves. I’d get new hose to, you can duct tape a string on the old hose to pull the new hose through. There is a bend down fab which you’ll need to move to get the old hose to move. Mine was right in front of the tach or the oil pressure gauge,

Hang on to the all the OEM parts Attaching the check valve and hoses etc. without the black “hoodie” attachment might be a real challenge. Oh and you’ll need to aim the new nozzles to keep to fluid from squirting on you G-floor.