I’ll see about fashioning a bracket.
Yes, concerned about a mis-aligned plunger and getting the lid jammed. Will try in increments and see how things go. Thank you for your reply.
Quote:
Originally Posted by lsf911
Well, I can tell you the brass clip is definitely to hold the wiring.
As far as mounting the deck lid light, you will have to make your own bracket and screw or rivet it onto the support bar. Shouldn't be too difficult.
Leaving the grill off with a condenser mounted underneath will not help you at all. Just start with the adjustment loose and tighten it down with small incremental turns on the latch, trying it after each adjustment until you are satisfied. I have heard of them getting stuck but I have done this several times this way without issue.
Good luck!
|