[empire0007]

Parting out this super expensive Hot Rod, due to an accident

Please log in Youtube under “Mike Hakimi” and check out the dyno on the engine and parts for sale
I have a 3.8L TT engine for sale, which was fully built (top & Bottom), with all high end parts, No Expense Spared. The engine was built by 911-Design, as we all know Lauren and his reputation worldwide.
ENGINE: is a 964 NS case, Potter Rods, big oil cooler, 3.8L Porsche Motorsports piston & Cylinders, GT2 EVO Cams, 993 welded heads, with all the high goodies, High Performance vale springs, High performance Titanium Retainers and spring seats, etc., Billet Aluminum Valve Covers, Huge injector’s for E85 fuel setup. All the machine work was done by Aasco Motorsports. (Just the repair receipt from 911-Design was around high $40,000 + $10,000 parts for this engine only and around $12000 for Aasco, machining 3.8L, heads, etc.) That’s $62000 Dollars plus the engine.
TURBOS & INTERCOLLER: The two turbos are Custom Garrett GT28 housing with GT3071 Compressors (hand built). Custom Big Full Intercooler with two electronic control fans, Tial Wastegates, Custom headers & Exhaust system, Custom heat shield for the turbos and headers. This costed me over $17,000
ELECTRONICS/COMPUTER SYSTEM: is Haltec with lots of options, including Flex Fuel option. Custom Race Harness, gold pins. Hold down tab for ignition spark plug wire connector. This costed me $8000.00
TRANSMITION: is a G50 with limited slip which is like new with brand new Stage 2 Clutch and light Flywheel. $11000
G-50 PEDAL ASSEMBLY: IN EXCELLENT CONDITION $700.00
THIS ENTIRE COMPLETE SETUP IS FOR SALE FOR $50K. This will cost you over 90K to set this up.
I have dyno sheet, dyno video, full receipt, pictures, etc.
Reason I am selling this, I got into an accident 2 weeks after the car was fully set. My wife will divorce me, if I was going to transfer this into a new car. My loss your gain.
Make me an offer, everything on this car is for sale





TRANSMITION: is a G50 with limited slip which is like new with brand new Stage 2 Clutch and light Flywheel. $9500
G-50 PEDAL ASSEMBLY: IN EXCELLENT CONDITION $700.00


SUSPENSTION:
THE COMPLETE SUSPENSION WAS SET BY MIRAGE INTERNATIONAL AND PURCHASE PRICE WAS OVER $11,000.00 DOLLARS +
ERP 935 Front Suspension kit $1850
Offset Camber Plates $630
Offset Camber Plates
More camber adjustment range
If you need more front camber adjustment range, these Offset Camber plates are for you. The Monoball and mounting holes are offset, allowing up to 3/4 degree of additional camber adjustment range. Just the ticket for your race car.
These plates use the same spherical bearing technology as our Front Monoball cartridges and replace the entire factory camber plate. For even more negative camber, combine with our De-Cambered Ball Joints.
Combine with Elephant Racing’s triangulated strut brace and PolyBronze control arm bearings to achieve a rigid front suspension geometry that maintains alignment under hard braking and cornering loads.

935 Rear Spring Plate Kit $849
Drilled hole positively defines plate length ensuring proper thread engagement at double adjuster and rod end, preventing accidental over-extension possible with double-slotted designs. Choose stock height or 1 inch raise for anti-squat geometry
Turbo Tie Rod Kits $235
Turbo tie rods improve feedback and steering precision by replacing the rubber tie rod bushings with ball socket ends. Originally equipped on the 911 turbo, they can be installed on the normal 911/912.

Bolt on Adjustable Bump Steer Kit $335
Complete RSR Valve Racing Struts $747
Rear Shock Tower Reinforcement $?
Coilover Springs: These are complete Coilover system fully engineered and ready to bolt on. No guesswork. Tune Spring Rates and valving, spring lengths that all work together right ready to racing. $2500
Spherical Control Arm Bearings$?
Monoball Bearing Cartridges $260
Trailing Arm Reconditioning Service $400
Adjustable Front & Rear Sway bars$700
Spherical Control Arm Bushing and Bearing $480

A 9K value for only $4300.00 Dollars.


OTHER PARTS
Battery Relocation Kit $175 will take $85
Battery Mount Kit Odyssey $145 will take $65
Battery Disconnect Switch $45 will take $20
Odyssey Battery $180 Will take $90
Rear Tie down $40 will take $20
Rennline Aluminum Floorboard $140 Will take $70
Rennline Aluminum Gas Pedal Adjustable kit 3 pieces $350 will take $150
RSR Style Engine Mount Cross Bar & Solid Aluminum Motor Mount $325 Will take $175
Momo Steering wheel $260 $ will take 175
2 GT3 Style Carbon fiber Seats & Seat Brackets $3000 Will take $1100
2 set 5-point Harness seatbelts $300 Will take $125






Brakes:
Here we have a complete used OEM Porsche 996 TT Brembo Big Rd Brake set up in excellent condition removed from a 1978 Porsche 911SC with very few miles on them.
There is no damage on these parts besides normal wear and tear. These should fit all 99 and up base 911 and some 986 Boxster and 987 Cayman Porsche.
Please verify these will work for your application. This auction includes ALL four calipers, pads, rotors and hardware as shown in the pictures, if there is anything else that you need please just inquire. I do not guarantee pad or rotor life but they are in just fine functioning condition. You will get the exact items shown in the pictures so please review all of the photos.

These are from a Porsche 996 turbo in excellent shape front and rear Calipers and Rotors $1500.00
Brake Master Cylinder 911/930 turbo kit Sport 23MM & Brake Fluid Reservoir – G50 Transmission $250
Tilton Brake Pedal Bias Adjuster Kit $100






Interior: 993 Black Suede with red stitching
For sale is Porsche OEM 993 full interior that is wrapped with black Suede and red stitching and red embroidered RS 3.8
Including is
1. Porsche OEM Top Dash Board
2. Porsche OEM Lower Dash Trim Glove Box
3. Porsche OEM Center Console
4. Porsche OEM Driver & Passenger Door Panels
5. Porsche OEM Sun Visors
6. Porsche OEM Rear Panel Cover
7. Porsche OEM Door Handles Set
8. Porsche OEM Door Handles Pocket Lid Arm Rest Cover Set
9. Porsche OEM Passenger Airbag Cover Dash Trim Set
10. Shift Knob boot and E-Brake Cover
11. Porsche OEM Convertible Rear speaker cover Set

Convertible 993 top








Exhaust System
Will take $150









METHANOL SYSTEM
I have an Alky Alcohol Injection System with 5 gallon tank installed in front $500


SEATS:
Real Carbon Fiber GT3 Style Seats with black leather and suede and red stitching and Porsche embroidery on the seats, including the mounts. $1100

GAUGES:
Porsche 911 Gauges 5 pieces with red LED lights $1000

Porsche 964 Rear Lights:
These real lights are in perfect condition. Center, Left & Right $700


DOORS:
Porsche 911 SC Driver & Passenger Doors with Sound Proofing $500.00


FUEL TANK
OEM Porsche 1978 911SC fuel tank, which was recently professionally done. $350.00



WHELLS:
These are CCW 3 Piece LM5 Wheels, which are 18x12 & 18x10 with Toyo R888 racing tires. Front driver and rear passenger are damaged. It’s repairable, since they are 3 piece wheels. Center is mat black and outside is glossy black asking $750.00


Porsche 911 964 993 Sound Pad swade with Porsche RS 3.8 red stiching $100

Other Parts:
Master Disconnect Switch Battery $25
Electronic Oil Pump- electrical fluid transfer unit - $150
LED Aircraft intercooler Temp Gauge. Digital inercooler differential indicator gauge. Indicateds inlet, outlet and split temps in Fahrenheit $200