|
Registered
Join Date: Oct 2008
Location: Nash County, NC.
Posts: 8,467
|
There is a white, flat 4prong connector that lays out under the hood in the main vDME harness.
2 solid black, 1 yellow (usually) and a black/purple
One black ohms to the DME relay
1 black is upshift light in Carrera tach
Black/ purple goes to back of tach replacing the black/purple there.
Fuel pump drive wire wires to the top of the fuse for fuel pump. Remove the original pump wiring from the relay and tape it out. Red Relay is no longer used in this application
Wire your coil wire from emergency lights that stay on when the engine cranks so there is ignition
The coil ground goes back to ground at the brain
That’s just off the top of my head, I’d have to look up the rest
Bruce
|