|
It is possible he has a big airleak - as previously suggested - pinched IC O ring or similar. But regardless, the thing needs to get back to spec either way - then see what arises. Can't really test for an airleak when engine won't run - other than pressurise the system - I go via the rubber elbow.
Either that or get things back to spec and hopefully better running then chase the other gremlins - idle mix, airleak etc.
Alan
__________________
83 SC, 82 930 (track) - Stock except for RarlyL8 race headers, RarlyL8 Zork, K27-7006, 22/28 T bars, 007 Fuel head, short 3&4 gears, NGK AFR, Greddy EBC (on the slippery slope), Wevo engine mounts, ERP rear camber adjust and mono balls, Tarret front monoball camber adjust, Elgin cams, 38mm ported heads, 964 IC. 380rwhp @ 0.8bar Apart from above, bone stock:-)
|