Thanks! The car has been sitting for a long time. Good news is the engine oil looks good, and the timing belt is not broken.
Someone took off the left fuel rail and injectors, the rail was inside the car. So I plan on pulling the intake and cleaning the valley area of dirt and such, then pull the plugs and run a bore-scope down in them and look for any trash in the cylinders and intake valve area, If that checks out clean, I am going to put some marvel mystery oil in cylinders and let it set for a week.
During that time I plan on removing the cam belt covers and checking the belt condition, just to see if is is good enough, so that I can try to attempt to turn the engine by hand slowly back and forth, after the week of soaking. ( the piston and rings may not be stuck, I just do not won't to take the chance without the oil soak).
If all this checks out and the engine is free,(before I try to start the engine), I plan on a new cam belt and to use old rollers just for now, to start the engine and guage it's condition. I plan on cleaning the fuel tank, checking the fuel pump, new fuel filter, checking fuses relays that it needs to run, oil change, flush the cooling system with distilled water and then add coolant,I am going to update it to Bosch type II injectors also.
Some of the plan so far!
This is going to be moving slow for awhile.
