|
Hello Kevin,
Just in case I disappear too soon. The following is{was} my set-up, works stunningly well on the street.
My suspension goes like this,
23mm front 30mm rear T-bars
22mm front & rear sway bars Tarrett
Von shocks street level 3 both front & rear, valved for the above T-bar sizes
Elephant racing full weld on bump steer kit
Front spindles raised 40mm
RSR front control arm bushing system
RSR rear spring plate bushing system
WEVO weld on rear sway bar mounts
Front strut tower brace
Fikse 5S wheels 17" x 8.5" front, 18" x 11" rears, 255-40's & 295-35's B.F.G. kdw2's
Hawk SPS front pads, Pagid black rear pads
Car weight 1/2 tank gas 2700 lbs. even
Alignment spec.'s,
corner balanced
-2.5 rear camber
-.9 front camber
front toe .06 deg each tire
rear toe .1 deg each tire
ride height real low, well below any normal persons taste
Mark
|