After many years not producing these , have decided to do this again. Years ago we made and sold these but stopped when our focus went away from the air cooled engines.
Having got back into the air cooled business again, we took a look at this and saw that our air cooled engine projects could use a stud with our finger prints all over them. Some added features we did not have in the past are included.
These are currently undergoing testing and hopefully into full production in October, available maybe mid October. Cost is still under review but expected to be competitively priced with others on the market.
Are these better than anything else sold today. I would never trash another make or say our are better. They may have some features not available in others making the use easier, possibly. But our main purpose for doing this is to offer as many of our own signature parts in our engines as possible. If anyone else would like to use, we are making them available. As with all of our current parts, they carry our level of quality.
We are also offering exhaust studs and case through bolts that will also act as a dowel at the split line, not requiring solid or hollow dowels to be fitted.
The projects we are currently involved in have dictated the need for superior and lighter parts. To this end we are changing over all of the non critical engine fasteners to Titanium, including all of the perimeter studs, washers and nuts.