[Emnyama944]

I just happen to have an LED from Radioshack for another project I'm working on, I tried the blink code and got nothing back. No Blinking codes.

I cant get past the fact that I only have 0.4 volts on the reference sensor but I've even checked the gaps on the reference sensor screws and made sure they are around 0.8mm from the sensor and I still get 0.4 volts and people seem to think the voltages don't matter so I guess the question is what issues causes the DME to cut power to the fuel pump or spark?

I've got all new inlet pipes, I replaced them before I started troubleshooting because the ones that came with the car were shot and my experience with old turbocharged cars taught me I don't want to mess around with old rubber pipes.