Hi!
I need help with my Weber 40 IDA 3C, which are running bad
I have opened them up, and will give them a good cleaning (ultrasound) incl. new gaskets, with a kit I bought.
While doing this I noticed that 1 of 6 air corrector jets (#74) is lower than all the others.
The 1st cylinder the head is level with carb. top. (left side, marked in yellow)
Is this normal?
Shall not all have the same hight, and shall they all be level as this 1/6, or shall all be a bit above?
Seems odd that only one is different!
Unscrewed #74 (the level one), and this (#73) emulsion tube sits lower in the carb for 1st cylinder than on the others do.
Either this #73 is correct, and all others sit to high, or something is wrong with this tube, and it sits to low..
Thanks for your input!
/Steffen
