jwolk,
The dash lights are easier if you pull the steering wheel. To do this on a stock wheel, you have to pop the horn pad , then get the big nut loose, mark where the wheel goes on splines after pulling washer, then start nut & pull wheel to break it loose from the splines.
Take the instrument panel screws out & you can get to lights from back. On some of replacement bulbs (GE, Sylvania) you may have to pull & place the little wires before putting into socket. While its off its good to replace all bulbs & have a cover to darken the car so you can check.
Some of the console bulbs may be different. If possible pull & take examples to store when you buy.
drew1
|