|
I would rather be driving
Join Date: Apr 2000
Location: Austin, TX
Posts: 9,108
|
I am concerned about your statement:
"MS2 w/dual EDIS. VR sensor hooked up to EDIS modules"
How is your twin plug connected? I just want to verify that the VR sensor does not go to both units.
I have always wired VR sensor to only one controller unit.
Should be...
VR sensor to ONE module.
EDIS PIP signal PIN 1 to MS Pin24 (ignition input)
SAW output signal from MS Pin 36 to EDIS Pin3 is split and sent to BOTH EDIS units.
And yes, your timing is VERY conservative. I can understand why you say the engine feels sluggish and lazy. Normally I would be in the 26-28 deg range at WOT and then upper 30s at light throttle and 40s in off-throttle overrun.
__________________
Jamie - I can explain it to you. But I can not understand it for you.
71 911T SWT - Sun and Fun Mobile
72 911T project car. "Minne" - A tangy version of tangerine #projectminne
classicautowerks.com - EFI conversion parts and suspension setups. IG Classicautowerks
|