Quote:
Originally Posted by GHEN
What is involved with replacing all of the wiring? Sounds expensive.
GHEN
|
Yes it’s very expensive and quite time consuming, though just replacing the engine harness, while still expensive, is going to cover 80% of the electrical reliability issues. Ftw
Kroon does the best harnesses.
Best thing to do with the rest of the wiring is to go over it systematically. Pick an area and check all the connectors, make sure the terminals are correctly located and clean. Make sure the insulation, especially near crimped terminals, has not exposed any wire and use heatshrink if it has. Check and clean all the grounds, this is a maintenance item so do it once a year. Clean the contact surfaces on any relay and fuse terminals, etc, etc.