|
Thanks for all the replies.
I had turbo tie rods installed a couple months ago, and an alignment done then. No issues.
Of course I know I did something wrong! I am 100% certain of that, haha.
I will reiterate the issue:
1. The steering wheel is installed, the bolt pattern is dead center and the wheels are straight.
2. Then I go for a drive and the steering wheel ends up rotating about 20 degrees to the left when driving straight.
After repeating this process twice, my current assumption is that because of reversing into my garage at an angle, despite the steering wheel and wheels being straight, I have not driven forward enough for the steering to truly be "straight".
Anyway, last night I also tried to install my wevo shifter, unfortunately the instructions on this site incorrectly say to use a 24mm socket but it is a 22mm socket that is needed to remove the lock nut on the 915 shifter housing. I don't have one, so this steering wheel issue will be postponed a few days until I have more time.
|