View Single Post
mziin mziin is offline
Registered
 
Join Date: Dec 2018
Location: San Francisco, CA
Posts: 20
3.2 won’t start / power issue

Hi all,

My car has been sitting for 2-3 weeks in the garage while I was doing some work to it, but I used a tender in the past few days and the battery got fully charged.
Unfortunately, my power windows, lights (dash and externals), and ignition are not working.

I’ve checked the voltage at the battery and it looked good (12.7V), the current draw seems reasonable (12 mA), and I haven’t seen any blown fuse.

Just to double-check, I removed the cruise control (servo, control unit and steering lever), but left the wiring harness in the car around the pedal cluster (as in it's no longer connected to the unit). I also removed the clutch switch, my assumption was that it's only required for the cruise control.
Are those a potential source for my issue?

Any leads I should explore?

Thank you all for the help!

Last edited by mziin; 11-03-2020 at 03:09 PM..
Old 11-03-2020, 03:04 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)