View Single Post
VFR750 VFR750 is offline
Registered
 
VFR750's Avatar
 
Join Date: Mar 2004
Location: Windsor, CT
Posts: 2,119
Measure the diameter of the pulley

Multiply by pi (3.14 is good enough)

cut a strip of paper to that length.

35 degrees is almost 36, which is 1/10 of the strip length.

Now you have a strip of paper that will show you where to put a mark on the pully.

Put a mark with a silver sharpie. Should reflect more that the base metal. Or file a small notch.
Old 11-15-2020, 04:41 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)