|
Let's go shooting.
Join Date: Feb 2003
Location: United Kingdom.
Posts: 1,200
|
As I recall the bracket has an enlarged hole (about 10mm) which fits over a metal dowelling. The other hole in the bracket is slotted to allow for adjustment. When I removed mine the flywheel sensor had been destroyed (it had clouted the teeth and subsequently been disembowelled). Obviously this gave me the necessary clearance to remove the bracket with the remains of this sensor still in place - although I've only just realized this since you've pointed out the problem.
If there really isn't any extra clearance to move the bracket then I would suggest loosening the bellhousing bolts a few turns (you're going to do the clutch anyhow so no biggie) to see if you can get some extra movement rearwards.
__________________
1983 944 Lux (manual) 2.5 litre 8 valve na and no pas
1991 944 (automatic) 2.7 litre 16 valve na and pas
"I have only five words for you: From my cold, dead hands."
Last edited by Dark Skies; 01-27-2004 at 03:58 AM..
|