got that warrior engine rebuilt and running again. Also spruced up my old taotao 110 and sold it to the same guy for his kids. It needed a starter and a battery iv been push starting it for 5 years and alot of loose stuff bushings and ball joints needed tightening up. I cobbled all of that together. Also the back axle was bent so I straightened it with a jack and chain.
Today i got a hilti dsh700 concrete saw working after much tribulations. First I fixed the rubber intake boot it was torn and the kill switch. Still had trouble running I ended up getting a new carb and it seemed ok. The guy brought it back after cutting 10 feet it crapped out again. I pressure tested the case and the seals seemed good I looked in the exhaust and the piston was broke. The skirt wore down too much and it broke out. Replaced piston and still ran bad. There was a little hose i forgot to plug in so it had an air leak. Runs good now but iv got to test it more before I give it back.
The guy also brought me a stihl chainsaw so thats next on the bench. Im thinking carb or an air leak. I checked the piston already and it looks good
