|
No holes anywhere, I stuck the antenna on the metal deck lid (which hinges up and down with the top). I placed the antenna with the rubber tail on the mouse style antenna pointing forward. The antenna has a peel off sticky back and I placed it so I had about 1" of the rubber tail to go around the front lip on the lid. then I used some electrical tape and speed ties to route the antenna cables along the inside of the metal deck lid and over to the hinges and then down the fire wall behind the seat and pulled the wires out underneath the seat to connect to the brain. You will need to splice two wires from the back side of the radio harness to connect the battery + and the ignitions + to the brain, There is a nut under the seat, which you can ground the brain to. Overall, it should take you about 4 hours to do and its not that hard.
|