|
915 clutch pedal hesitating when releasing
I have looked and looked but haven’t found anything like what mine is doing.
The cable is correctly adjusted.
1.2mm then attach cable adjust to 1mm, throw is right on 25mm + - .5mm usually within .2mm.
I have run the cable all the way in the clevis and run it way out and still can adjust correctly.
And total throw is adjusted with floor board stop.
Fresh rebuilt trans. New flywheel, clutch, pressure plate, throw out bearing, bearing guide tube, release fork. All lubed at install.
Problem is when I depress the clutch to shift and release it hesitates just a second when you lift your foot.
It was worse with the cable out of the clevis more. With it all the way in at the clevis it is the best I have had it.
A real head scratcher.
|