Hello on the board
I've made a fuel injection conversion from K- Jetronic, to EFI on my 911 SC from 1980, And seaching Ignition and fuel map for initial start up.
Have anyone to share for similar engine set up ?
Setup :
Engine is stock SC Euro 188 Hp
3.0 L
CR : 8.3:1
std. cam
std exhaust
Single plug
Inductive ignition with 1,5 ohm Coil as a start. (Will probably go back to CDI later, if i don't get interference with the 5v circuits )
3.2 Carrera intake
Bosch 0 280 150 440 injectors from BMW 328 I
Injector flow rate should be 214 cc @ 3.0 bar
Fuel pressure 3.5 bar fixed, but interchangeable pressure valve inset
ECU : EMU Black
VR sensor 0 261 210 001
Trigger wheel : 60-2
Roslin