|
22" side mount slides. Self closing slides can be had without any mod to the drawer or the opening. Must use low profile screw that may or may not come with slides. Pull slide apart by pressing the release. Attach the small portion on drawer, then the large part to the side of cabinet. You must measure the tolerances are super important here or else you will have crocked drawers.
The first pic is a Blum face frame hinge looks to be replaced once, 3/4" overlay (the amount the door sits over the frame). Bottom hinge is junk. Replace them all with Blum 3/4 over lay(lets make sure the overlay is 3/4") and a face frame plate. Install the plate and the door clips into the plate. no more messing around with screws to tighten the two together.
|