Quote:
Originally Posted by wakeupct
My only question is what covers the holes in the 12mm check valve? 
-Pete
Sent from my iPhone using Tapatalk |
Pete,
Hope the set-up shown below could explain how I would do to tackle your problem.
The 12-mm x 1.5 coupler is available from Belmetric for $7. Use the 30-mm long coupler. For the space between the 12-mm FP check valve, I would use a 12-mm ID bushing. A plugged 12-mm banjo fitting will work too.
I have been using these plugged 8-mm banjo fittings (shown above) for many years now for my testing and troubleshooting. One was brazed with metal and the other one using JBWeld.
Tony
Edit:
Use the shorter 20 or 25 mm coupler instead of 30 mm (too long).