|
Vacuum Hose Connection
I've been doing a bit of troubleshooting to track down a rough cold start issue. I may have found the source of the problem, but want to check the hose routing before fixing it. I was starting to do a partial drop for a smoke test and spotted something trapped between engine tin and seal. It looks like a hose got pinched on engine install and was left disconnected. I tracked it back to a tee connection by the throttle body. It also looks like there's a connection missing off the charcoal canister, and the hose is the right length to connect up to it. If anyone has access to a vacuum hose.diagram could you confirm this would be the correct place to connect this line? The car is an 83 ROW SC. I've added a few pictures below.
Thanks
John
|