Quote:
Originally Posted by creaturecat
Ba7s
takes all of 10 minutes to fuse 'em. time well spent.
|
Once I decided to cut the wires to the ignition switch and then solder and heatshrink the wires from the fuse in series, yes it took about 15 minutes.
Before all this, it took 4 hours to figure out what size fuse, package, and availability. It took about another 2 hours of trying to identify, reach and attempt to separate the connectors from the ignition switch without too much force on an old component while lying on my back. I gave up, cut two wires, then soldered and heat shrunk the fuse. If I'd started with that simple approach, it doesn't take too long. Whatever I did looks pretty good and the fuse can easily be replaced.
Phil