[McGalliard]

I'm hoping I figured out at least one of the issues. I was loaned 2 dwell meters and they apparently do not read the same. In fact, they are off by about 10 degrees from one another. So, while I set the dwell initially to the first meter and got it to the upper limits of spec, which felt like a major change from where my baseline starting point was, the second meter reads that I'm now way under spec for dwell angle. So, I'm hoping that the first meter is out of calibration and the second meter is correct. I will reset the dwell using the second meter, then readjust timing hoping that it clears everything up back to normal and confirms the problem was the tool, not the car.