Looking for some help!
Dropped in a set of 19mm raised struts with the ER bump kit. Removed 3 of the rubber inserts. Put the car down on the ground and its stiffer than an F1 car. Zero travel. Played with the ride height to see if that was it (even though that defeats the purpose) and no dice.
My next thought is maybe the tie rod bolts on the bump steer are too tight? Could this be it?
OR
The angle of the tie rod/spacers is off causing it to bind up when compressed. Note that the suspension moves smoothly from fill droop to about 75% compressed. The last 25% or so (ride height range) is when it binds up and sticks.
Any help is appreciated!
