|
thank you both! I removed the switch to see if the make/break pattern followed the schematic. It seems like there perhaps is a short in the switch(?) I only had battery on pin 2 at the driver’s side door which seems off (?) but I haven’t traced the thing out to see what it should be doing.
Yes Gilles, you’re correct that these are the 2-motor mirrors. One of the first things I had to fix on the car was the driver’s side mirror (which was falling off, and also didn’t move).
I will check out the L/R switch as well. Both sides will not move “out” from the car, only in. I can move either one up and down, or towards the car so I am getting power to the X-axis motor but only in one direction. It is the same issue for both mirrors.
|