|
I just did this on my completely new system, all rebuilt, new lines everywhere, new MC, rebuilt Turbo calipers.
Just bled it with gravity.
Hoses on each bleeder long enough to go higher than the MC.
Fill the reservoir and lower the hose for a few minutes starting with the PS rear caliper.
Fluid will come out and after you have let it "flush" for a while, put the hose back up high again and off to the next wheel.
I think it took me an hour all in, no excitement, no pedal pressing (although I do swish it around a bit to help fill everything) on each corner.
Just keep the reservoir filled and its easy, peaceful and no problem
Been doing this way for years.
D.
|