|
Redrilling and dimpling the trim piece will look terrible. Better to go with one of the other solutions.
You can access the screws from underneath, so that works for the screw clip option, but you will really struggle to drill new fender holes right next to the old holes. JB Weld may or may not hold up there, but is easy to try.
I welded mine up and drilled new holes, since my car was going to paint anyway. IIRC I used 2.5mm bits, and broke several redrilling next to or through the hard welds.
The effort was worth it though, the popouts are cool!
__________________
1981 911SC restomod "Minerva"
2004 Boxster S
2021 Cayman GTS 4.0 manual "Olive"
2014 Cayenne GTS V8 (wife's lover)
The slope is not slippery; in fact it is entirely frictionless.
|