|
Registered
Join Date: Sep 2002
Location: Green-Salem, NC
Posts: 3,914
|
One more note though. you can't use your 66mm rods on a 70.4mm crank. The rods shouldn't be more than $100. If your cylinders/pistons/heads/cams are good then if you combine that with a good 70.4mm bottom end you'll end up with a pretty hot motor.. something north of 190hp and for not alot more than just replacement parts. Heck it could be less since I belive the 70.4mm crank is more plentiful than the 66mm one's.
__________________
Tim
1973 911T
2005 VW GTI
"Dave, hit the brakes, but don't look like your htting the brakes...what? I DON'T KNOW, BRAKE CASUAL!!!" dtw's thoughts after nearly rear ending a SHP officer
|