|
Weber jetting question
I just rebuilt my Weber's and installed ,F7 Emulsion tubes
55 idle jets, 130 mains, 200 air correction
and 32mm venturis. I have a 1750 cc engine on my 68. It finally is not running lean as it did before the switch, but it really doesn't idle without the mixture screws all the way in. I switched back to the 50 idle jets and now it idles OK, but the mixture adjustment cant be out more then 1/2 turn before it starts dieing. Should I go to a 47.5 idle jet ?, try to fuss with the air mix?. I've read all the archives, but that's where I came up with the new jetting installed
|