|
Hi ,
I think you will have a hell of a time trying to rotate whole cable lenght to screwing it in. You really need to just take out clevis pin and loosen nut and screw in to shorten cable.
The best tips I can give is , remove front carpet pieces to get them out of the way , remove front driver seat ..if you need to get some space for your body to get in there , remove petal wood floor boards
peel back carpeting over center tunnel , then just pop off clevis pin , remove clevis , adjust lenght then reassemble.It might help having a nail
to align clevis back on clutch petal arm.
Hope that helps ..you might have to mess with it awhile, but it will work
Joe
|