|
Also I know that, bridging pin 36 and ground in the DME harness connector (with DME removed) does NOT operate the main relay (it's supposed to according to Bentley).
No voltage at fuel relay; fuel pump does not operate if you use a jumper; due to no voltage at main relay.
Also part of the positive box jump box thing at passenger side doesn't supply voltage. The small part with 2 5mm looking wires does not, where as the big 10mm multiple wires on the right side of it do.
However, when car is put in gear, it moves while starting. I would assume you need ignited fuel to move the car?
|