[fintstone]

Just wanted to say that if the emergency flasher works...it is not the relay flasher.......guess you know that now. On the bright side; that also limits your problem significantly. It is most likely not bulbs, bulb grounds, connectins, etc. It has to either be the stalk switch or the wiring between the flasher and the stalk. It is most likely the stalk switch. First make sure there are no loose or broken wires under your dash that come from the turn signal stalk. Make sure the round 6-pin bulkhead connectors unser the dash are all seated correctly. One wire comes from the back of the emergency flasher button, pin 49a and goes to the stalk...that could be broken. If no bad wires....most likely the stalk.