|
heat exchanger removal
Last post on 6-8-00 inquiring about 2.2 eng. rebuild. Thanks for the info: Warren, Leland, Roy. I now have all the books suggested other than the factory workshop manuals. After successfully dropping eng and trans together, (could not separate eng from trans when attempting to drop eng alone) I began to disassemble eng external components. Here is my problem: The bolts to the heat exchangers are frozen solid. I have broken one stud off at the head already. I am using Aero Kroil (Kano Laboratories) which is the best penetrating oil I have used. Any ideas would be much appreciated. Thanks Joe Williams
|