[FrayAdjacent911]

Thanks for the input. I'll see what I can do with the housings I have. I know Pelican has the COVER for the housing. If I can remove the housings and get them cleaned up, they may be usable, but I may still want to check into replacements.

As for the brakes Jamie, the lights were on, the left on the low filament and the right on the high (someone probably jammed the bulb in backwards), and nothing changed when the brake pedal was pushed. (tried with the ignition on, and with the engine running, nothing). I checked the left bulb, which is now not coming on at all, and it is VERY dirty. It's possible it just needs a good cleaning. I will probably just buy all new bulbs. I know the signal and brake bulbs are 1156s and 1157s, but what are the smaller bulbs in the front signal housings? They are painted over, and I can't make out the numbers. I may have to pull one and take it with me to a parts store to check on.

I hope it's just a minor problem with that switch. We can check that on Friday, Jamie. I hope to have the throttle pedal and shift bushing kit in by then...