89911

After about 2 months on jackstands, I finally finished my torsion bar and sway bars upgrades along with my brake system rebuild. I am looking for opinions and settings on ride height before I get it aligned and corner balanced. Right now the rear is 24 1/2 and front 25 at the center of the fender lip. I need to take the car out and drive to get the suspension to settle. My stiff shocks are also holding it up a bit. I already had my car lowered to euro specs prior, but with the stiffer bars, 22mm and 28mm, I could go a little lower. I also have Bilstein sports. I have adjustable spring plates on the back, so raising or lowering at least an inch is a snap. It looks good now, but little things like not being able to get a floor jack under it may make me want to raise a small amount.

------------------
8 9 9 1 1, The last of the line.