Here are some more details. If you have any questions, just ask.
and from the back.
If I had to make this rotisserie over again, one change I would make is to mount the long tubing that connects the two ends under the tubing that the casters mount to. The wheels provide plenty of ground clearance to have the long tube mounted there. This way you would not have raise the car so far up to rotate it around. The length of the long tube would have to be increased by 8 inches overall to make up for the new location.
Here is a detail of the front yoke. Note that the car is upside down. This also shows the lower support bracket for the oil cooler that I made.
Here are two details of the rear yoke.
Look closely at the notches.
and finally a parting shot, showing the overall.
Thanks and I hope you all found this interesting.
Flank