[wahoofan]

OK, I definitely need some help!!
I've monkeyed with this thing forever and still can't get it to work.

I have spark from the coil - Warren said that spark at the coil means the crane unit is wired correctly.

I have no spark from plug wires - Does this mean that the unit is working but not lined up correctly?

I have re-checked dizzy alignment and it is dead-on - points to mark at #1 with pulley at Z1

Cap/rotor/wires are all new - triple checked wires for correct firing order

Alignment of Crane seems dead-on with shutter, and I've tried moving it back and forth about a dozen times

Other important info - Crane is installed "upside-down" but instructions say that makes no difference (only way it would fit). I have not changed the plugs yet, 'cuz I don't have the right tools and I'm afraid to lose something down there! CDI box buzzes nice and loud when I turn the key.

Any help/advice would be appreciated. I'm starting to get desperate!!