Hello,
what do you think about this 2 braces? The white one is from an original 3.0 RS an the red one is my car. The brace for my car is from RUF.
Some years ago I had a strut brace from Weltmeister and after some laps on the track it made noise. I found out that the screw between the lower part and the horizontal aluminium part was not firm. I fixed it but some days later I had the same problem- even with colour on the screw.
Then I talkes to an suspension engineer from Weissach. He told me: "We want to connect the towers (tower brace) and not the upper end of the dampers- so look at the 3.0 RS. This is the way the factory did in the torsion bar cars"
Grüße
Thorsten
